Skip to content

Home UV adhesives & fast curing

UV adhesives & fast curing

UV adhesive dispensing
and curing in sequence.

Adhesive placement coordinated with light curing for optical modules, electronic assemblies and other suitable parts. LinkTech develops the dispense, fixture and guarded curing arrangement as a connected process.

UV adhesive dispensing and curing in sequence.

Application engineering

UV adhesives & fast curing

Light-curable adhesives can support short assembly sequences when the material and joint allow an effective cure. Dispensing and exposure therefore need to be developed together. We engineer the deposit location, part support and access for the curing head, with shielding and machine controls included in the station. Where parts obscure the bond line, the material choice and curing strategy must account for those shadowed regions.

Placement and part location

The valve, tip and fixture are selected for the bond geometry. Dispense amount and the movement into assembly are coordinated so the adhesive reaches the intended interface while the parts remain located during the next operation.

Light delivery at the bond

Curing-head position, wavelength and exposure are developed for the adhesive and available light path. Trials establish the practical arrangement; opaque features may call for another exposure position or a suitable secondary-cure chemistry.

Guarding and machine timing

Shielding, interlocks and exposure timing are integrated with the dispense and handling sequence. The equipment can combine these operations in one station or transfer the part to a separate guarded curing position.

Materials & process

UV- or visible-light-curable adhesives and suitable dual-cure formulations, selected for the substrates, joint geometry and available light access.

Free testing. Free solution advice.

Discuss your application with our engineers. We handle the technical evaluation with you.