Skip to content

Home Component fixation (SMT glue)

Component fixation (SMT glue)

Component fixation
with SMT adhesives.

Controlled adhesive dots for securing components on a PCB. LinkTech integrates dispensing with board positioning, component placement and the curing sequence, for dedicated workstations and conveyor-fed equipment.

Component fixation with SMT adhesives.

Application engineering

Component fixation (SMT glue)

SMT adhesive dispensing places material at the support points beneath a component. The deposit must fit the available space and hold the part through the subsequent operations for which the adhesive is specified. We develop the dispensing station around the board layout and assembly sequence, including applications that use adhesive fixation before wave soldering. The scope covers material delivery, nozzle access, board support and the machine signals that coordinate the operation.

Adhesive at the placement point

Valve, tip and control settings are developed for the required dot pattern. Board referencing and fixture support keep the programmed location connected to the actual pad and component geometry, including access between neighbouring features.

Placement and curing sequence

Dispensing, placement and curing are coordinated around the adhesive and assembly. We account for the interval between operations and the clearance needed as the component settles onto the board, rather than treating the dispense cycle in isolation.

Workstation or line integration

A standalone station can use a dedicated board fixture; an inline machine adds conveyor transfer and station handshakes. Camera checks can be included for visible dot presence or placement where that supports the production process.

Materials & process

SMT assembly adhesives selected for the board, component and subsequent thermal process. Material behaviour is assessed during application testing.

Free testing. Free solution advice.

Discuss your application with our engineers. We handle the technical evaluation with you.