Application engineering
Form-in-place gasketing (FIPG)
Form-in-place gasketing applies a sealing bead that is joined to its mating part while the material remains uncured, following the formulation’s assembly requirements. The bead has to follow the flange, negotiate corners and close its start-to-finish joint in a controlled way. We develop fluid delivery, movement and the joining sequence together. The final seal depends on the material, housing design and assembled joint; dispensing is engineered as part of that combination.
Bead geometry and continuity
Fixture referencing, dispense height and the programmed path locate the bead on the sealing land. Motion through corners and the overlap at the closing point are developed with the required bead shape and material behaviour.
Feed and controlled shut-off
Metering and nozzle selection address the sealant’s flow and the required deposit. Start, stop and head withdrawal are coordinated to manage tails, strings and unintended material between parts during the operating cycle.
Joining, curing and verification
The dispense cycle is coordinated with the material’s curing or assembly requirements. Cameras can check visible bead presence and placement; any leak or ingress requirement is verified using the appropriate test on the assembled product.