Skip to content

Home Potting & sealing

Potting & sealing

Potting and sealing
for electronic assemblies.

Resin filling and local sealing for modules, sensors and enclosed electronics. LinkTech engineers material delivery, mixing where required, and the fill sequence around the components and interfaces inside the housing.

Potting and sealing for electronic assemblies.

Application engineering

Potting & sealing

Potting places a protective material around an assembly; local sealing addresses selected interfaces and openings. The two operations can form part of the same machine, but their deposit geometry and material handling may differ. We develop the dispensing arrangement around housing volume, component layout and the areas that must remain accessible. For two-component systems, proportioning, mixing and the usable time after mixing are treated as part of the filling process.

Metering and mixing

One- or two-component delivery is selected for the resin and application. Feed equipment, metering and the mixer are configured together, including the flow range, refill arrangement and access for routine material changes.

A controlled filling sequence

The dispense position and progression through the housing are developed around cavities and components. Trials examine fill behaviour and air entrapment, with nozzle movement and part orientation adjusted where they influence the result.

Interfaces and downstream handling

Connector faces, cable exits and mounting features are accounted for in the fixture and dispense program. The station can be connected with curing and handling so the filled assembly moves through production in a defined sequence.

Materials & process

Epoxy, polyurethane and silicone potting or sealing formulations. Process development follows the resin’s mix requirements, flow behaviour and cure chemistry.

Free testing. Free solution advice.

Discuss your application with our engineers. We handle the technical evaluation with you.