Skip to content

Home Dispensing products

Dispensing products

Two-component cartridges & mixers

Disposable mixing for two-component adhesives and resins. Cartridge interfaces, mixer elements and outlet geometry are matched to the material and dispensing arrangement.

MC round-element static mixers

Consumables catalogue

Tips, barrels, adapters and mixers

A connected range for the material path, from the barrel and feed connection to the dispense tip or mixing tube. We match sizes and connections to your dispensing equipment.

Static mixer families

MC round-element static mixers

MC round-element static mixers

Round static-mixer geometry with white or yellow elements, in a broad range of lengths and element counts.

Sizes & technical details
ItemDetails
Model familiesMC3.0-8s; MC05, MC06, MC08, MC10, MC13
Catalogue overall length38–423 mm
Mixing elements8–36
Listed internal mixing diameter3–13 mm

Enquire about this product ↗

MFC square-element static mixers

MFC square-element static mixers

Green square mixing elements with standard and screw-thread base versions in the MFC6 and MFC8 families.

Sizes & technical details
ItemDetails
Listed modelsMFC6-16, MFC6-24, MFC8-24; screw-thread MFC6-24 and MFC8-24
Catalogue overall length96–162 mm
Mixing elements16 / 24
Listed internal mixing diameter5.3 / 8.7 mm

Enquire about this product ↗

MB cartridge static mixers

MB cartridge static mixers

Cartridge-mounted mixers with pointed, flat and square-mixer variants, shown for 1:1 and 10:1 material systems.

Sizes & technical details
ItemDetails
Listed familiesMB3.2-16, MB5.4-16, FMB6-16, FMB6-24
Material-ratio variants1:1 / 10:1
Catalogue overall length74–122.5 mm
Mixing elements16 / 24

Enquire about this product ↗

Equipment & integration

Mix at the outlet.

Cartridge formats provide a compact route to handling two-component materials, with static mixing at the outlet. Our team supports component selection and workstation integration around the material pair, flow and working time.

Pack format and dispensing equipment

We help match the cartridge, ratio format and dispensing drive, including the connection between the pack and mixing outlet.

Mixer selection for the application

Mixer geometry and flow are considered with the material pair, supported by supplier guidance and practical application testing.

Support through everyday use

We advise on the operating arrangement around pauses, material changes and mixer replacement, with a setup suited to the workstation.

System components

Connect the complete fluid path.

Free testing. Free solution advice.

Discuss your application with our engineers. We handle the technical evaluation with you.