Skip to content

Home Dispensing products

Dispensing products

Non-contact jetting systems

Small deposits without nozzle contact. LinkTech develops jetting around the fluid, deposit pattern and part geometry, with application trials supporting the equipment recommendation.

San-Ei Tech EXJET jet valve and controller

Product range

Equipment for your application

Explore the models and configurations below. Our engineers can help with equipment selection, application testing and integration.

San-Ei Tech EXJET jet valve and controller

SET / San-Ei Tech

EXJET / EXJET-HS Piezo Jet Valves

Piezo-driven jet valves for small deposits in underfill, die attach and component sealing. EXJET handles high-viscosity fluids; EXJET-HS adds a higher-speed option for dot and line dispensing.

Sizes & technical details
ItemDetails
EXJET — SPJH1000Up to 1,000 Hz; normal operation 500 Hz
EXJET-HS — SPJH1000HSUp to 2,500 Hz; normal operation 1,000 Hz
EXJET viscosity ratingUp to 300,000 mPa·s
ControllerSPJC1000V

Enquire about this product ↗

San-Ei Tech BEATRUM jet valve and controller

SET / San-Ei Tech

BEATRUM / BEATRUM-H Jet Valves

Non-contact jet valves for adhesives, coatings, oils and greases. The BEATRUM-H high-impact variant extends the range to higher-viscosity materials, with a compact controller for shot timing, recipes and external control.

Sizes & technical details
ItemDetails
Valve modelsSJVH7000 / SJVH7000-H
Dispensing frequencyUp to 250 Hz
BEATRUM viscosity ratingUp to 50,000 mPa·s
BEATRUM-H viscosity ratingUp to 300,000 mPa·s
ControllerSJVC7000

Enquire about this product ↗

San-Ei Tech NOVADOT jet valve and controller

SET / San-Ei Tech

NOVADOT Electromagnetic Jet Valve

Electromagnetic jetting for electronic assembly, sealing and lubrication. An integrated nozzle heater and air-cooled drive support continuous dispensing, with external triggering for integration into automated equipment.

Sizes & technical details
ItemDetails
Valve / controllerSJVH3000 / SJVC3000
Dispensing frequencyUp to 100 Hz; 300 Hz with optional drive
Viscosity range1–50 Pa·s
Nozzle heatingUp to 100 °C

Enquire about this product ↗

San-Ei Tech JETTY jet valve and controller

SET / San-Ei Tech

JETTY Compact Jet Valve

A compact electromagnetic jet valve for adhesives, fluxes, inks and lubricants. Its modular fluid path and small valve body suit installations where mounting space and maintenance access are limited.

Sizes & technical details
ItemDetails
Valve dimensions — W × D × H31 × 92.5 × 92 mm, excluding nozzle
Valve weight364 g
Dispensing frequencyUp to 100 Hz; 300 Hz with optional drive
Nozzle heatingUp to 70 °C

Enquire about this product ↗

San-Ei Tech NOVADOT-HM jet valve and controller

SET / San-Ei Tech

NOVADOT-HM Hot-Melt Jet Valve

Heated non-contact jetting for hot-melt dots and lines. The electromagnetically driven head works with a dedicated temperature-control system and accepts PLC-controlled dispensing time for machine integration.

Sizes & technical details
ItemDetails
Valve modelSJVH3000-HM
Temperature range80–200 °C with head air cooling
Material container30 cc heat-resistant syringe
ControllerSJVC3000-F

Enquire about this product ↗

San-Ei Tech G-DOT jet valve and controller

SET / San-Ei Tech

G-DOT Grease Jet Valve

A dedicated jetting system for controlled grease application on bearings, gears and sliding assemblies. External pail or tank feeding supports bulk material supply, with optional syringe feeding for other production setups.

Sizes & technical details
ItemDetails
Dispensing frequencyUp to 100 Hz; 300 Hz with optional drive
Maximum grease feed pressure1.2 MPa
Material feedExternal pail or tank; syringe option
Nozzle heatingUp to 100 °C

Enquire about this product ↗

Equipment & integration

Deposit from a controlled stand-off.

Jetting can support deposits around raised features and on surfaces where contact is undesirable. We help establish material suitability and coordinate triggering, motion and head positioning as part of a complete dispensing solution.

Material and jetting-head selection

Our team evaluates the material formulation, viscosity behaviour and feed conditions to identify a suitable jetting arrangement.

Patterns coordinated with motion

We engineer the working gap, shot sequence and motion interface around the target surface and component layout.

A practical installation

Feed routing, head access and cleaning provisions are incorporated into the workstation or cell, alongside suitable process monitoring.

System components

Connect the complete fluid path.

SET / San-Ei Tech SV51

Dispensing valves

Controlled delivery and clean shut-off at the part. We match the valve and fluid path to the material, then integrate the head, feed system, mounting and controls.

Free testing. Free solution advice.

Discuss your application with our engineers. We handle the technical evaluation with you.