Skip to content

Home Dispensing products

Dispensing products

Dispensing valves

Controlled delivery and clean shut-off at the part. We match the valve and fluid path to the material, then integrate the head, feed system, mounting and controls.

SET / San-Ei Tech SV51

Product range

Equipment for your application

Explore the models and configurations below. Our engineers can help with equipment selection, application testing and integration.

SET / San-Ei Tech SV22

SET / San-Ei Tech

SV22 Syringe Valve

Compact valve that mounts directly beneath a syringe. Its polymer wetted path supports controlled dispensing of instant and anaerobic adhesives.

Sizes & technical details
ItemDetails
MountingDirect syringe attachment
Wetted materialsPEEK / PTFE / FFKM
Maximum fluid pressure0.5 MPa
Valve weight43 g

Enquire about this product ↗

SET / San-Ei Tech SV35DA

SET / San-Ei Tech

SV35DA Piston Valve

Piston valve for medium- to high-viscosity materials such as grease and silicone. Adjustable stroke and suck-back at shutoff support controlled dispensing with less dripping.

Sizes & technical details
ItemDetails
Maximum fluid pressure0.7 MPa
Flow adjustmentAdjustable stroke
ShutoffSuck-back action
Wetted materialsUHMW / stainless steel

Enquire about this product ↗

SET / San-Ei Tech SV35HF

SET / San-Ei Tech

SV35HF High-flow Piston Valve

High-flow piston valve for filling and injection across a range of fluid viscosities. Suck-back at the end of dispensing helps keep the outlet from dripping.

Sizes & technical details
ItemDetails
Maximum fluid pressure0.7 MPa
ApplicationFilling and injection
ShutoffSuck-back action
Wetted materialsUHMW / stainless steel

Enquire about this product ↗

SET / San-Ei Tech SV51

SET / San-Ei Tech

SV51 Needle Valve

Needle valve with adjustable flow for small deposits of oils, solvents and UV materials. The valve design supports controlled dispensing of low-viscosity fluids.

Sizes & technical details
ItemDetails
Maximum fluid pressure2.0 MPa
Flow adjustmentAdjustable stroke
Fluid inlet1/8 NPT
Discharge connectionLuer taper

Enquire about this product ↗

SET / San-Ei Tech SV59MD

SET / San-Ei Tech

SV59MD Fine-dispensing Needle Valve

Needle valve for fine dots of low- to medium-viscosity fluids. A calibration function and controlled shutoff help set up repeat dispensing tasks.

Sizes & technical details
ItemDetails
Maximum fluid pressure0.7 MPa
AdjustmentCalibration function
Fluid rangeLow to medium viscosity
Fluid inletM5

Enquire about this product ↗

SET / San-Ei Tech SV62

SET / San-Ei Tech

SV62 Diaphragm Valve

Diaphragm valve with a UHMW fluid path for solvents, fluxes and reactive adhesives. Its adjustable stroke supports dispensing of low- to medium-viscosity materials.

Sizes & technical details
ItemDetails
Maximum fluid pressure0.48 MPa
Wetted materialUHMW
Flow adjustmentAdjustable stroke
Fluid inlet1/8 NPT

Enquire about this product ↗

SET / San-Ei Tech SV62-B

SET / San-Ei Tech

SV62-B Light-blocking Diaphragm Valve

Diaphragm valve with a black UHMW fluid path for light-sensitive UV and UV anaerobic adhesives. Designed for controlled dispensing of low-viscosity materials.

Sizes & technical details
ItemDetails
Maximum fluid pressure0.48 MPa
Wetted materialBlack UHMW
ApplicationUV and UV anaerobic adhesives
Flow adjustmentAdjustable stroke

Enquire about this product ↗

SET / San-Ei Tech SV12

SET / San-Ei Tech

SV12 Compact Diaphragm Valve

Compact diaphragm valve for UV-curable adhesives and other low- to medium-viscosity fluids. Its short body suits dispensing equipment with limited mounting space.

Sizes & technical details
ItemDetails
Overall length63.2 mm
Weight85 g
Maximum fluid pressure0.48 MPa

Enquire about this product ↗

SET / San-Ei Tech SV70

SET / San-Ei Tech

SV70 Conformal Coating Valve

Conformal-coating valve with a square nozzle for broad coating patterns at low flow. Suitable for selective application across defined areas of a substrate.

Sizes & technical details
ItemDetails
ApplicationConformal coating
NozzleSquare nozzle
Maximum fluid pressure0.7 MPa

Enquire about this product ↗

SET / San-Ei Tech SV01CS

SET / San-Ei Tech

SV01CS Substrate Spray Valve

Non-contact spray valve for substrate coating with materials such as UV adhesives, silicone and epoxy. Pair it with the SVC620S controller to adjust atomizing air.

Sizes & technical details
ItemDetails
Maximum fluid pressure0.7 MPa
Material viscosityUp to approximately 10,000 mPa·s
Compatible controllerSVC620S
Application methodNon-contact spray

Enquire about this product ↗

SET / San-Ei Tech SV47

SET / San-Ei Tech

SV47 High-pressure Spool Valve

High-pressure spool valve for viscous sealants and greases. Its simple mechanism provides a serviceable option for dispensing from high-pressure material supplies.

Sizes & technical details
ItemDetails
Maximum fluid pressure17.2 MPa
Wetted materialsUHMW / stainless steel
Fluid inlet3/8 NPT
Discharge port1/4 NPT

Enquire about this product ↗

Equipment & integration

Clean shut-off. A compatible fluid path.

Needle, diaphragm, pinch, spray and non-contact dispensing serve different production tasks. We help identify the suitable approach and engineer its installation around material behaviour, access to the part and everyday maintenance.

A valve suited to the material

We consider the fluid path, wetted components and cleaning method alongside the material's viscosity, fillers and curing behaviour.

Placement and shut-off at the part

Head mounting and nozzle access are engineered around the deposit location, with application trials supporting the choice of valve and tip.

Integration and service access

Our engineering includes controllers, feed lines, brackets and hose routing, with practical access for replenishment, cleaning and component changes.

System components

Connect the complete fluid path.

Free testing. Free solution advice.

Discuss your application with our engineers. We handle the technical evaluation with you.